The shop press for removing forklift tires is an indispensable machine for all mechanical workshops that need to replace solid tires.
Our hydraulic press, model PFC 300 G, is the ideal machine for mounting and dismounting solid tires on forklifts, tractors, excavators and pressure washers.
Thanks to its large work surface of 1200 x 900 x 70mm, even the largest solid tyres can be positioned.
A 404 x 60mm steel disc for breaking the tire is fixed to the hydraulic cylinder rod.
The clearance between the piston and the platform is 1100 mm, while the distance between the columns is 1500 mm.
This shop press for removing forklift tires is equipped with protective nets that can be opened both on the front and on the back of the machine. Both nets are equipped with microswitches that block the descent of the hydraulic cylinder if they are opened during the pressing cycle.
The 7,5 kW hydraulic power unit develops a cylinder approach speed of 22 mm/sec and a working speed of 2 mm/sec.
The press works by using the lever and the button to be pressed simultaneously, as required by European safety standards.
Click here below for more information: